Whether it is a patio floor or a table top, all materials sometimes get surface damage from rougher handling such as damage from a metal chair leg with a sharp edge. Good news, shallow scratches are often easy to fix.
Let’s explain how you can remove light scratches from Govaplast boards in just a few simple steps, making the board look as good as new.
Sanding the scratch
If the scratch is superficial, you can treat it by lightly sanding the area. Use fine sandpaper, such as 200 grit or higher. Sand over the scratch. After sanding, you should notice that the scratch becomes less visible.
Heat treatment (Optional)
By carefully heating the plastic with a blowtorch, the material softens and can recover better. Here’s how to do it: Hold the torch at a safe distance from the surface (20 cm) to avoid melting the plastic. Keep the heat source moving constantly to prevent overheating. Once the surface is slightly warmed, you can sand the scratch again.
Finishing
After removing the scratch, you can finish the treated area with finer grit sandpaper and go over it again with the torch.
Conclusion:
Shallow scratches can often be removed by lightly sanding or, if needed, applying a heat treatment. By working carefully, you can restore your table, bench or decking. Tip: Best to practice on a piece of leftover board, or on a piece of board that is not too visible.
